The following are some of the safety standards for all types of electronic products.

• ANSI C95.3:1972 / Techniques & instrumentation for measurement of potentially hazardous electromagnetic radiation at microwave frequencies.
• ANSI/ISA S82.01:1994 / Safety standard for electrical & electronic test, measuring, controlling, & related equipment / General requirements
• ANSI/ISA S82.02.02:1996 / Safety requirements for electrical equipment for measurement control & laboratory use
• ANSI/ISA S82.02.04:1996 / Safety requirements for electrical equipment for measurement control & laboratory use
• ANSI/ISA S82.03:1988 / Standard for electrical & electronic test, measuring, controlling, & related equipment / Electrical & electronic process measurement & control equipment
• EN 563 / Safety of machinery. Temperatures of touchable surfaces. (establish temperature limit values for hot surfaces)
• EN 626-2 / Safety of machinery. Reduction of risk to health from hazardous substances emitted by machinery. Part 2 – Methodology leading to verification procedures
• EN 746-2 / Industrial thermoprocessing equipment. Part 2 – Safety requirements for combustion & fuel handling systems
• EN 746-3 / Industrial thermoprocessing equipment. Part 3 Safety requirements for the generation & use of atmospheric gases.
• EN 777-4 / Multiburner gas-fired overhead radiant tube heater systems for nondomestic use. Part 4 – System H. Safety
• EN 793 / Requirements for safety of medical supply units
• EN 809 / Common safety requirements for pumps & pump units for liquids
• EN 957-1 / Stationary training equipment. Part 1 – General safety requirements & test methods; Amendment A1:1998 to EN 957-1
• EN 982 / Hydraulics; safety requirements for fluid power systems & their components
• EN 983 / Pneumatics; safety requirements for fluid power systems & their components
• EN 1070 / Terminology, safety of machinery
• EN 1987-1 / Explicit requirements for safety of electrically propelled road vehicles. Part 1 – Storage of energy on-board
• EN 1987-2 / Explicit safety requirements for electrically propelled road vehicles. Part 2 – Functional safety means & protection against failures
• EN 1987-3 / Explicit safety requirements for electrically propelled road vehicles. Part 3 – Protection against electrical hazards for users
• EN 12547 / Centrifuges; common safety requirements
• EN 12626 / Laser processing machines safety requirements (ISO 11553:1996, modified)
• EN 41003:1998 / Safety requirements particular to equipment to be connected to telecommunications networks
• EN 45502-1 / Active implantable medical devices. Part 1 – General requirements for safety, marking, & information to be provided by the manufacturer
• EN 50019 / Electrical apparatus for potentially explosive atmospheres – improved safety
• EN 50020 / Electrical apparatus for potentially explosive atmospheres – intrinsic safety
• EN 50061/A1 / Medical electrical equipment; safety of implantable cardiac pacemakers
• EN 50065-1:1991 / Signaling on low-voltage electrical installations for frequency range of 3 kHz to 148.5 kHz. Part 1 – General requirements, frequency bands, & electromagnetic disturbances; Amendment A3:1996 to EN 50065-1:1991
• EN 50083-1:1993 / Cabled distribution systems for television, sound, & interactive multimedia signals. Part 1 – Safety requirements; Amend. A2
• EN 50087:1993 / Safety of household & like electrical appliances
• EN 50088 / Safety of electric toys. Amendment A1 to EN 50088; Amendment A2 to EN 50088
• EN 50091-1:1993 / (USP) Uninterruptible power systems. Part 1 – General & safety requirements
• EN 50091-1-1:1996 / (USP) Uninterruptible power systems. Part 1.1 – General & safety requirements for UPSs used in operator access areas
• EN 50091-1-2:1998 / Uninterruptible power systems. Part 1.2 – General & safety requirements for UPSs used in restricted access locations
• EN 50106 / Safety of household & similar electrical appliances / Particular rules for routine tests referring to appliances under the scope of EN 60335-1 & EN 60967; Amendment A1 to EN 50106
• EN 50116:1996 / Information technology equipment. Routine electrical safety testing in production
• EN 50144-1 / Safety of handheld electric motor operated tools. Part 1 – General requirements
• EN 50144-2-1 / Safety of handheld electric motor operated tools. Part 2-1 – Requirements specifically for drills
• EN 50144-2-2 / Safety of handheld electric motor operated tools. Part 2.2 – Requirements specifically for screwdrivers & impact wrenches
• EN 50144-2-4 / Safety of handheld electric motor operated tools. Part 2.4 – Requirements specifically for sanders
• EN 50144-2-5 / Safety of handheld electric motor operated tools. Part 2.5 – Requirements specific to circular saws & circular knives
• EN 50144-2-6 / Safety of handheld electric motor operated tools. Part 2.6 – Requirements for hammers
• EN 50144-2-7 / Safety of handheld electric motor operated tools. Part 2.7 – Requirements for spray guns
• EN 50144-2-8 / Safety of handheld electric motor operated tools. Part 2.8 – Requirements specific to sheet metal shears & nibblers
• EN 50144-2-9 / Safety of handheld electric motor operated tools. Part 2.9 – Requirements for tappers
• EN 50144-2-10 / Safety of handheld electric motor operated tools. Part 2.10 – Requirements for jig saws
• EN 50144-2-11 / Safety of handheld electric motor operated tools. Part 2.11 – Requirements specific to sabre & reciprocating saws
• EN 50144-2-14 / Safety of handheld electric motor operated tools. Part 2.14 – Requirements for electronic planning tools
• EN 50144-2-15 / Safety of handheld electric motor operated tools. Part 2.15 – Requirements for hedge trimmers
• EN 60065:1993 / Safety for mains-operated electronic & related machinery for household & similar general use. Amendment A11:1997 to EN60065:1993
• EN 60065:1998 / Audio, video, & comparable electronic equipment
• EN 60073 / Basic & safety principles for man/machine interface, marking & identification. Coding principles for indication devices & actuators
• EN 60143-1:1993 / Series capacitors for power systems. Part 1 Performance, testing, & rating. Guide for installation
• EN 60204-1:1997 / Safety of machinery electrical equipment of machines. Part 1 – General requirements
• EN 60215:1989 / Safety requirements for radio transmitting equipment. Amendment A1:1992 to EN 60215:1989; Amendment A2:1994 to EN 60215:1989
• EN 60335-1:1988 / Safety of household & comparable electrical appliances. Part 1 – General requirements; Amendment A2:1988 to EN 60335-1:1988; Amendment A5:1989 to EN 60335-1:1988; Amendment A6:1989 to EN 60335-1:1988; Amendment A51:1991 to EN 60335-1:1988; Amendment A52:1992 to EN 60335-1:1988; Amendment A53:1992 to EN 60335-1:1988; Amendment A54:1992 to EN 60335-1:1988; Amendment A55:1993 to EN 60335-1:1988; Amendment A56:1995 to EN 60335-1:1988
• EN 60335-1:1994 / Safety of household & comparable electrical appliances. Part 1 – General requirements; Amendment A1:1996 to EN 60335-1:1994; Amendment A11:1995 to EN 60335-1:1994; Amendment A12:1996 to EN 60335-1:1994; Amendment A13:1998 to EN 60335-1:1994; Amendment A14:1998 to EN 60335-1:1994
• EN 60335-2-2:1995 / Safety of household & comparable electrical appliances. Part 2.2 – Requirements specific to vacuum cleaners & water suction cleaning appliances; Amendment A1:1998 to EN 60335-2-2:1995
• EN 60335-2-3:1995 / Safety of household & comparable electrical appliances. Part 2.3 – Requirements for electric irons Amendment A1:1999 to EN 60335-2-3:1995
• EN 60335-2-4:1995 / Household & like electrical appliances. Part 2.4 – Requirements for spin extractors Amendment A1:1997 to EN 60335-2 4:1995
• EN 60335-2-5:1995 / Safety of household & comparable electrical appliances. Part 2.5 – Requirements for dishwashers AmendmentA1:1999 to EN 60335-2-5:1995; Amendment A11:1997 to EN 60335-2-5:1995
• EN 60335-2-6:1999 / Safety of household & comparable electrical appliances. Part 2.6 – Requirements for stationary cooking ranges ovens & like appliances
• EN 60974-1:1990 / Safety requirements for arc welding equipment. Part 1 – Welding power sources
• EN 60999-1:1993 / Connecting devices. Safety requirements for screw & screwless-type clamping elements for electrical copper conductors. Part 1 – General & specific requirements for conductors from 0.5 mm2 to 35 mm2
• EN 61204:1995 / Low-voltage power supply devices, (dc) direct current output. Performance characteristics & safety requirements
• EN 61210:1995 / Connecting devices. Safety requirements for flat quick-connect terminations for electrical copper conductors
• EN 61603-1:1997 / Transmission of audio &/or video & related signals using infrared radiation. Part 1 – General
• EN 132421:1997/ Blank detail specification. Fixed capacitors for electromagnetic interference suppression. Capacitors for which safety tests only are required
• EN 133200:1999 / Sectional spec. Passive filter for electromagnetic interference suppression. Filters for which safety tests are obligatory
• HD 194 S1:1977 / Requirements concerning the electrical safety of laser device & installations
• HD 251 S3:1982 / Safety of household & like electrical appliances. Part 1 – General requirements; Amendment A1:1985 to HD 251 S3:1982; Amendment A2:1987 to HD 251 S3:1982; Amendment A3:1987 to HD 251 S3:1982
• IEC 60086-4:2000 / Primary batteries Part 4 – Safety of lithium batteries
• IEC 60086-5:2000 / Primary batteries Part 5 – Safety of batteries with aqueous electrolyte
• IEC 60204-1:2000 / Safety of machinery Electrical equipment of machines Part 1 – General requirements
• IEC 60204-11:2000 / Safety of machinery Electrical equipment of machines Part 11 – Requirements for high voltage equipment for voltages above 1000 V AC or 1500 V DC & not exceeding 36 kV
• IEC 60252-1:2001 / AC motor capacitors Part 1 – General Performance, testing, & rating Safety requirements Guide for installation & operation
• IEC 60513 TR3:1994 / Fundamental aspects of safety standards for medical electrical equipment
• IEC 60601-1:1988 / Medical electrical equipment Part 1 – General requirements for safety
• IEC 60601-1-2:1993 / Medical electrical equipment Part 1 – General requirements for safety 2. Collateral standard: Electromagnetic compatibility Requirements & tests
• IEC 60601-1-3:1994 / Medical electrical equipment Part 1 – General requirements for safety 3. Collateral standard: General requirements for radiation protection in diagnostic x-ray equipment
• IEC 60601-1-4:2000 / Medical electrical equipment Part 1.4 – General requirements for safety Collateral standard: Programmable electrical medical systems
• IEC 60601-2-1:1998 / Medical electrical equipment Part 2.1 – Specific requirements for safety of electron accelerators in the range of 1 to 50 MeV
• IEC 60601-2-2:1998 / Medical electrical equipment Part 2.2 – Specific requirements for high-frequency surgical equipment
• IEC 60601-2-3:1991 / Medical electrical equipment Part 2 – Specific requirements for short-wave therapy equipment
• IEC 60601-2-4:1983 / Medical electrical equipment Part 2 – Requirements specific to cardiac defibrillators & cardiac defibrillator monitors
• IEC 60601-2-5:2000 / Medical electrical equipment Part 2.5 – Requirements for ultrasonic physiotherapy equipment.
• IEC 60601-2-6:1984 / Medical electrical equipment Part 2 – Requirements for the safety of microwave therapy equipment
• IEC 60601-2-7:1998 / Medical equipment Part 2.7 – Requirements for the safety of high-voltage generators of diagnostic x-ray generators
• IEC 60601-2-8:1999 / Medical equipment Part 2.8 – Requirements for the safety of therapeutic x-ray equip operating in the range of 10 kV to 1 MV
• IEC 60601-2-9:1996 / Medical electrical equipment Part 2 – Requirements for patient contact dosimeters used in radiotherapy with electrically connected radiation detectors
• IEC 60601-2-11:1997 / Medical equipment Part 2 – Requirements for the safety of gamma-beam treatment equipment
• IEC 60601-2-15:1988 / Medical equipment Part 2 – Requirements for the safety of capacitor discharge x-ray generators
• IEC 60601-2-17:1989 / Medical electrical equipment Part 2 -Requirements remote-controlled automatically driven gamma-ray afterloading equipment
• IEC 60601-2-18:1996 / Medical electrical equipment Part 2-Requirements for the safety of endoscopic equipment
• IEC 60601-2-22:1995 / Medical electrical equipment Part 2-Requirements for diagnostic & therapeutic laser equipment
• IEC 60601-2-24:1998 / Medical electrical equipment Part 2.24 Requirements for the safety of infusion pumps & controllers
• IEC 60601-2-25:1993 / Medical electrical equipment Part 2 – Specific requirements for the safety of electrocardiographs
• IEC 60601-2-26:1994 / Medical electrical equipment Part 2 – Specific requirements for the safety of electroencephalographs
• IEC 60601-2-27:1994 / Medical electrical equipment Part 2 – Specific requirements for the safety of electrocardiographic monitoring equipment
• IEC 60601-2-28:1993 / Medical electrical equipment Part 2 – Specific requirements for x-ray tube assemblies &d x-ray source assemblies for medical diagnosis
• IEC 60601-2-29:1999 / Medical electrical equipment Part 2.29 – Requirements for the safety of radiotherapy simulators
• IEC 60601-2-30:1999 / Medical electrical equipment Part 2.30 – Specific requirements for the safety including essential performance of automatic cycling noninvasive blood pressure monitoring equipment
• IEC 60601-2-31:1994 / Medical electrical equipment Part 2 Requirements for external cardiac pacemakers with an internal power source
• IEC 60601-2-32:1994 / Medical electrical equipment Part 2 – Specific requirements for associated equipment of x-ray equipment
• IEC 60601-2-33:1995 / Medical electrical equipment Part 2 -Requirements for magnetic resonance (MRI) equipment for medical diagnosis
• IEC 60601-2-34:2000 / Medical electrical equipment Part 2.34 Requirements for invasive blood pressure monitoring equipment
• IEC 60601-2-40 / Medical electrical equipment Part 2.40 – Requirements for the safety of electromyographs & evoked response equipment
• IEC 60601-2-44:1999 / Medical electrical equipment Part 2.44 – Requirements for the safety of x-ray equipment for computed tomography
• IEC 60601-2-45:1998 / Medical equipment Part 2.45 – Requirements for the safety of mammographic x-ray equipment & mammographic stereotactic devices
• IEC 60601-2-46:1998 / Medical electrical equipment / Part 2.46 – Specific requirements for the safety of operating tables
• IEC 60728-11:1997 / Cabled distribution systems for television & sound signals Part 11 – Safety
• IEC 60742:1983 / Requirements for isolating & safety transformers
• IEC 60745-1:1997 / Safety of handheld motor-operated electric tools Part 1 – General requirements
• IEC 60825-1:1998 / Safety of laser products Part 1 – Equipment classification, requirements, & user’s guide
• IEC 60825-2:2000 / Safety of laser products Part 2 – Safety of fibre optic communication systems
• IEC 60825-4 / Safety of laser products Part 4 – Laser guards
• IEC 60825-7 TR2:2000 / Safety of laser products Part 7- Safety of products emitting infrared optical radiation, exclusively used for wireless “free air” data transmission & surveillance
• IEC 60825-8 TR3:1999 / Safety of laser products Part 8 – Guide for the safe use of medical laser equipment
• IEC 60825-9 TR3:1999 / Safety of laser products Part 9 – Compilation of maximum permissible exposure to incoherent optical radiation
• IEC 60924:1990 / DC supplied electronic ballasts for tubular fluorescent lamps General & safety requirements
• IEC 60926 / Auxiliaries for lamps Starting devices (other than glow starters) General & safety requirements
• IEC 60928:1999 / Auxiliaries for lamps / Ac-supplied electronic ballasts for tubular fluorescent lamps General & safety requirements
• IEC 61010-2-010:1992 / Safety requirements for electrical equipment for measurement, control, & laboratory use Part 2.010 – Requirements for laboratory equipment for the heating of material
• IEC 61010-2-020:1992 / Safety requirements for electrical equipment for measurement, control, & laboratory use / Part 2.020 – Requirements for laboratory centrifuges
• IEC 61010-2-031:1993 / Safety requirements for electrical equipment for measurement, control, & laboratory use Part 2.031 – Requirements for handheld probe assemblies for electrical measurement & test
• IEC 61010-2-032:1994 / Safety requirements for electrical equipment for measurement, control, & laboratory use Part 2.032 – Requirements for handheld current clamps for electrical measurement & test
• IEC 61010-2-061:1995 / Safety requirements for electrical equipment for measurement, control, & laboratory use Part 2.061 – Requirements for laboratory atomic spectrometers with thermal atomization & ionization
• IEC 61029-1:1990 / Safety of transportable motor operated electric tools Part 1 – General requirements
• IEC 61046:1993 / Dc-or ac-supplied electronic step-down convertors for filament lamps General & safety requirements
• IEC 61293:1994 / Marking of electrical equipment with ratings related to electrical supply Safety requirements
• IEC 61557-1:1997 / Electrical safety in low-voltage distribution systems up to 1000 V AC & 1500 V DC Equipment for testing measuring or monitoring of protective measures Part 1 – General requirements
• IEC 61557-2:1997 / Electrical safety in low-voltage distribution systems up to 1000 V AC & 1500 V DC / Equipment for testing, measuring or monitoring of protective measures Part 2 – Insulation resistance
• IEC 61557-3:1997 / Electrical safety in low-voltage distribution systems up to 1000 V AC & 1500 V DC Equipment for testing measuring or monitoring of protective measures Part 3 – Loop impedance
• IEC 61508-4:1998 / Functional safety of electrical electronic & programmable safety-related systems Part 4 – Definitions & abbreviations
• IEC 61508-5:1998 / Functional safety of electrical, electronic & programmable safety-related systems Part 5 – Methods for determining safety integrity levels
• IEC 61508-7:2000 / Functional safety of electrical, electronic & programmable safety-related systems Part 7 – Overview of techniques
• IEC 61557-1:1997 / Electrical safety in low-voltage distribution systems to 1000V AC & 1500V DC Equipment for testing, measuring, or monitoring of protective measures Part 1 – General requirements
• IEC 61557-2:1997 / Electrical safety in low-voltage distribution systems up to 1000V AC & 1500V DC Equipment for testing measuring or monitoring of protective measures Part 2 – Insulation resistance
• IEC 61557-3:1997 / Electrical safety in low-voltage distribution systems up to 1000V AC & 1500V DC Equipment for testing measuring or monitoring of protective measures Part 3 – Loop impedance
• IEC 61557-4:1997 / Electrical safety in low-voltage distribution systems up to 1000V AC & 1500V DC Equipment for testing measuring or monitoring of protective measures Part 4 – Resistance of earth connection & equipotential bonding
• IEC 61557-5:1997 / Electrical safety in low-voltage distribution systems up to 1000V AC & 1500V DC Equipment for testing measuring or monitoring of protective measures Part 5 – Resistance to earth
• IEC 61557-6:1997 / Electrical safety in low-voltage distribution systems up to 1000V AC & 1500V DC Equipment for testing measuring or monitoring of protective measures Part 6 – Residual current devices (RCD) in TN &TT systems
• IEC 61557-7:1997 / Electrical safety in low-voltage distribution systems up to 1000V AC & 1500V DC Equipment for testing, measuring, or monitoring of protective measures Part 7- Phase sequence
• IEC 61557-8:1997 / Electrical safety in low-voltage distribution systems up to 1000V AC & 1500V DC Equipment for testing measuring or monitoring of protective measures Part 8 – Insulation monitoring devices for IT systems
• IEC 61557-9:1999 / Electrical safety in low-voltage distribution systems up to 1000V AC & 1500V DC Equip. for testing measuring or monitoring of protective measures Part 9 – Equipment for insulation fault location in IT systems
• IEC 61557-10:2000 / Electrical safety in low-voltage distribution systems up to 1000V AC & 1500V DC Equipment for testing measuring or monitoring of protective measures Part 10 – Combined measuring equipment for testing measuring or monitoring
• IEC 61558-1:1998 / Safety of power transformers, power-supply units, & like Part 1 – General requirements & tests
• IEC 61558-2-1:1997 / Safety of power transformers, power-supply units, & like Part 2 – Particular requirements for separating transformers for general use
• IEC 61558-2-2:1997 / Safety of power transformers, power supply units, & like Part 2.2 – Requirements specific to control transformers
• IEC 61558-2-4:1997 / Safety of power transformers, power-supply units, & like Part 2 – Requirements for isolating transformers for general use
• IEC 61558-2-6:1997 / Safety of power transformers, power-supply units, & similar Part 2 – Requirements for isolating transformers for general use
• IEC 61558-2-7:1997 / Safety of power transformers, power-supply units, & similar Part 2 – Specific requirements for transformers for toys
• IEC 61558-2-8:1998 / Safety of small power transformers, power-supply units & like Part 2.8 – Requirements for bell & chime transformers
• IEC 61558-2-13:1999 / Power transformers, power-supply units, & similar devices Part 2.13 – requirements for auto-transformers for general use
• IEC 61558-2-15:1999 / Safety of power transformers, power-supply units, & like Part 2.15 – Requirements for isolating transformers for the supply of medical locations
• IEC 61558-2-17:1997 / Power transformers, power supply units & like Part 2 – Requirements for transformers for switch-mode power supplies
• IEC 61558-2-19:2000 / Power transformers, power supply units, & like devices Part 2.19 – Requirements for perturbation attenuation transformers
• IEC 61558-2-20:2000 / Safety of power transformers, power supply units, & like devices Part 2.20 – Specific requirements for small reactors
• IEC 62083:2000 / Medical electrical equipment Requirements for the safety of radiotherapy treatment planning systems
• IEC 62151:2000 / Safety of equipment connected to a telecommunication network
• IEEE C95.1:1999 / IEEE standard for safety levels with respect to human exposure to radio-frequency electromagnetic fields, 3 kHz to 300 GHz
• IEEE C95.3:1991 (R1997) / IEEE-recommended practice for the measurement of potentially hazardous electromagnetic fields RF & microwave
• IEEE 80:2000 / Safety in ac substation grounding
• IEEE 81.2:1991 / IEEE guide for measurement of impedance & safety characteristics of large, extended, or interconnected grounding systems
• IEEE 510:1983 / IEEE recommended practices for safety in high-power & high-voltage testing
• IEEE 902:1998 / IEEE guide for maintenance operation & safety of industrial & commercial power systems
• ISO 10079-1:1999 / Medical suction equipment Part 1 – Safety requirements for electrically powered suction equipment
• ISO 11197:1996 / Medical electrical equipment Requirements specific to safety of medical supply units
• ISO 11553:1996 / Safety of machinery Laser processing machines
• ISO 13090-1:1998 / Mechanical vibration & shock Guide on safety of tests & experiments with people Part 1 – Exposure to whole-body mechanical vibration & repeated shock
• ISO 14708-1:2000 / Implants for surgery Active implantable medical devices Part 1 – General requirements for safety marking as well as information to be provided by the manufacturer
• SO/TR 16142:1999 / Medical devices Guidance on the selection of standards in support of recognized essential principles of safety & performance of medical devices